Vladyslav Aksonov
UKRAINE • + Follow
Edit Project
Tools, APP Software Used etc.
|
Autodesk Fusion 360Autodesk
|
Description
Enclosure for "12V LED/Fairy lights PSU with backup power source"
Enclosure to hold "12V LED/Fairy lights PSU with backup power source" that also holds LiPo battery and servees as a spool for a fairy lights
In addition to PSU you would need:
- LiPo battery. Enclosure designed to fit 605068 3.7V 2000mAh batery but it would probably fit most of other batteries of same style. Here is mine for reference: https://www.sparkfun.com/products/13855
- Fairy lights/LED string. Tested to work fine with any of those: https://www.dfrobot.com/product-1184.html(any color), https://www.dfrobot.com/product-2400.html(12V ones)
- Potentiometer to controll brightness/turn lights off. For listed above strips 1K pot was optimal for range from "super bright" to "super long life". Model created around that specific one but maybe can fit others.
- 4 M3 threaded inserts
- Optionally - 10x10mm heatsink to improve heat decipation from LiPo charger IC. Like that
Assembly goes like that:
- Print "Battery compartment", add threaded inserts in it. Put LiPo battery in it
- Print "PSU", thread battery wires through hole in module. Install PSU, connect battery and potentiometer to it.
- Print "Controls", install on top, install potentiometer in it. Use 4 M3 screwqs to hold that sanwitch together.
- Print "Handle" and install it on to potentiometer as knob.
You can also print 2 instances of "Pattern" part and install one between "Battery Compratment" and "PSU" and another one between "PSU" and "Controls" to turn enclosure in to spool.
CAD-Custom parts and enclosures
May 02,2023
382 views
Enclosure for "12V LED/Fairy lights PSU with backup power source"
Enclosure to hold "12V LED/Fairy lights PSU with backup power source" that also holds LiPo battery and servees as a spool for a fairy lights
382
0
0
Published: May 02,2023
Purchase
Donation Received ($)
PCBWay Donate 10% cost To Author
File Last Updated: 2023/05/03 (GMT+8)
File update record
2023-05-0310:26:10
CAD or technical drawing file is updated.
2023-05-0310:25:20
CAD or technical drawing file is updated.
*PCBWay community is a shared platform and we are not responsible for any design issues.
Copy this HTML into your page to embed a link to order this shared project
Copy
Under the
Attribution-GPL
License.
Topic
- Comments(0)
- Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
Remove
It looks like you have not written anything. Please add a comment and try again.
View More
View More
VOTING
0 votes
- 0 USER VOTES
0.00
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Design
1/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Usability
2/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Creativity
3/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Content
4/4
More by Vladyslav Aksonov
- Enclosure for "12V LED/Fairy lights PSU with backup power source" Enclosure to hold "12V LED/Fairy lights PSU with backup power source" that also holds LiPo battery a...
- 12V LED/Fairy lights PSU with backup power source This X-Mas in Ukraine was ... not perfect. But we still wanted to have holiday so we had IKEA batter...
You may also like
-
-
Open Source Very Large Stick - Freejoy & MMjoy2 breakout board
531 0 0 -
RF Control training board for students based on ESP32 C3
716 0 2 -
Aquarius+ Computer, Standard PCB
949 0 5 -
KINETIC COASTERS with a TWIST! Laser or 3D Print some DIY Magic
624 0 1 -
RPI - 8 IO PLC With ATTiny85 Watch Dog
546 0 1 -
Nintendo Famicom HVC-001 Controller Shells
644 0 1 -
COMMODORE 128 DIAGNOSTIC REV.785260 KEYBOARD DONGLE
604 0 4 -
COMMODORE 128 15KHz DISPLAY ADAPTER (C128 80 COLUMN ADAPTER)
822 1 7