Product Description

Voice broadcast module JQ8900-16P (with USB to TTL module\speaker)


USB interface: 2.0 standard

UART interface: standard serial port, TIL level

Input voltage: DC 3.3-5.2 V, recommended 5 V power supply

Rated current: Sleep current: 500 uA; Working current: 10 MA

Size: 20.32*15. 5 mm

Working temperature: -40 degrees to 85 degrees

Working humidity: 5%~95%

MP3 file format

1. Support all bit rates 11172-3 and IS013813-3 lay. Support audio decoding

2. Sampling rate support rate (KHZ): 8/ll. 025/12/16/22. 05/24/32/44.1/48

3. Support Normal, Jazz, Classic, Pop, Rock and other sound effects


  • Support MP3, WAV hardware decoding
  • Support FAT file system
  • Support sampling (K H z): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48
  • The 24-bit DAC output internally uses DSP hardware decoding, non-PWM output, dynamic range support 90dB, signal ratio 85d B
  • Multiple control modes, two-wire serial mode, one-wire serial control, button mode
  • Support U disk, TF card, SPIFLASH
  • Support USB sound card, card reader, HI D control
  • Support SPIFLASH to be simulated as a USB flash drive, and directly update the voice in SPIFLASH just like operating a USB flash drive
  • Support the control of common functions such as previous song, next song, play, pause, stop, song selection, etc. 
  • Support system deep sleep, after sleep, the current is as low as 600 micro amps, and it can be awakened by a string and command IO
  • Support external input audio and MP3 audio mixing, external input, MP3 output, external input and MP3 mixing three output switching


  • Car navigation voice broadcast:
  • Highway transportation inspection, toll station voice prompt:
  • Voice prompts for safety inspections at railway stations and bus stations:
  • Voice prompts in power, communications, and financial business halls:
  • Voice prompts for vehicle entry and exit channel verification;
  • Voice prompt of public security frontier inspection channel:
  • Multi-channel voice correction or device operation guidance voice:
  • Voice announcements for safe driving of electric sightseeing vehicles;
  • Automatic alarm for mechanical and electrical equipment failure
  • Fire alarm prompts;
  • Automatic broadcast equipment, broadcast regularly;
  • Treadmill voice navigation:

  • Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    • RGB Glow Tube DIY Clock
      $49.99 or 6000 Beans
      BUY NOW
    • LILYGO T-Encoder Shield V1.0 CH552 Kit
      $29.99 or 3600 Beans
      BUY NOW
    • -16%
      Glow tube clock IN12
      $66.99 or 8040 Beans
      BUY NOW
    • -50%
      Musical Tesla Coil
      $19.99 or 2400 Beans
      BUY NOW
    • Voice broadcast module JQ8900-16P (with USB to TTL module\speaker)
      $5.99 or 720 Beans
      BUY NOW
    • RGB 3 Color Full Color LED SMD Module For Arduino AVR PIC
      $1.00 or 100 Beans
      BUY NOW
    • SPI Serial Electronic Paper Drive Board (with adapter plate)
      $24.99 or 3000 Beans
      BUY NOW
    • 100W*2 Bluetooth Audio Amplifier Module
      $19.99 or 2400 Beans
      BUY NOW
    • USB3.0 Transparent Multi-Interface Splitter
      $11.99 or 1440 Beans
      BUY NOW
    • Serial port module USB to TTL converter
      $6.99 or 840 Beans
      BUY NOW
    • 4-way Motor Drive Board(Compatible with Arduino)
      $16.00 or 1920 Beans
      BUY NOW
    • 51 MCU development board
      $10.00 or 1200 Beans
      BUY NOW
    • Bluetooth 5.0 audio module TPA3116D2 stereo high-power digital HIFI level 2.0 power amplifier board 2x50W
      $9.99 or 1200 Beans
      BUY NOW
    • Micro USB Type B to DIP 5 Pin Adapter Pinboard
      $1.00 or 30 Beans
      BUY NOW
    • TEC1-12706 Thermoelectric Peltier Cooler
      $3.00 or 300 Beans
      BUY NOW
    Product Name
    Link for reference