Like

ElectroLab

There were placed a 30 units order of a 175x100mm PCB with SMD/TH Components Assembly. The final product, service and shipment were perfect (100/100). The quality of the silkscreen is amazing and the components placement awesome. The communication for certain components adquisition and assembly was very fluid and the price of the full order unbeatable.





September 22,2016
865 viewsReport item
  • Comments(0)
  • Likes(2)

You might like

The quality of the PCBs is excellent and the delivery time has been much less than I expected. I have used these PCBs in a display that has the functions of clock, stopwatch and thermometer. My project: Design of a 7-segment SMD display, with serial control. With th is circuit you can stack as many digits in series as necessary, because the number of control pins doesn't change. In this circuit, the TPIC6B595 is a Shift Register, and a 74HC04 (6 inverters) is used as the 'driver / separator' of the control signals: Clock, Strobe and Enable. When using a shift register, the control signals (Clock, Strobe and Enable) are the same for all digits, and the Data line is connected to the first digit ... chaining the data output of one digit with the next. The design of this 7 segment display is modular, and you can connect as many digits in series as necessary. Each digit has its own 5V voltage regulator, but it is only necessary to install one to power the entire series. The connections of the output of a module are connected to the input of the next module, thus allowing to feed all the modules with a single voltage regulator. In order to avoid an excessive load of the control signals (Clock, Strobe and Enable) and to avoid possible interferences in the wiring, each module has a circuit that performs the functions of 'regenerator' of the signal. The integrated circuit 74HC04 has 6 inverters, and they are used in pairs, in order to obtain the same logic level of the input like output. The only detail to consider is that the connection of the 3 control signals with the shift register (TPIC6B595) are made at the outputs of the first inverter. In this way, the CPU should deliver the 3 control signals: Clock, Strobe and Enable in inverted mode.
x
mm
Earn a $5 Welcome Bonus