(DIY) SUPER SALT DIAGNOSTIC CARTRIDGE FOR ATARI 8-BIT FAMILY (SHORT VERSION)
(DIY) SUPER SALT DIAGNOSTIC CARTRIDGE FOR ATARI 8-BIT FAMILY
(Suitable for ATARI 400 and ATARI 800)
Hello,
This is a tested and working circuit board.
(This cartridge has only been tested on the Atari 800XL.)
Because I don't own an Atari 800 or Atari 400, the length of the PCBs I drew before was long for the Atari 400 and Atari 800 model computers. For this reason, I shortened the length of the PCBs so that the cartridge compartment cover can be closed when used with the Atari 400 and Atari 800 models. I tried it with the Atari 800XL and it worked fine, but on models like the 800XL this PCB should be used with a box to avoid short circuiting with the the aluminum caps on the cartridge slot.
For more information: (Long PCB version link of this cartridge)
This PCB is also suitable for making 8KB or 16KB single-game cartridges.
COMPONENTS:
27c512 (W27C512) or 27C256 or 27C128 (DIP28)
74LS00 (DIP14) (74LS00 is only required for 16KB ROMs, not needed for 8KB ROMs.)
100nf Ceramic Capacitor
DIP28 WIDE IC SOCKET (optional)
DIP14 IC SOCKET (optional)
You will need a programmer for EPROM
Please choose: Edge connector YES and Bevelling Yes (45°)
This PCB design is based on Joe 'Kingpin' Grand's Atari cartridge schematics. Many thanks to Joe 'Kingpin' Grand.
https://en.wikipedia.org/wiki/Joe_Grand
In order to protect your electronical devices, always turn off your ATARI before inserting or removing cartridges.
Gerber files can be changed at any time. Before paying for the PCBs, be sure to update your orders!
If your programmer have capability to test IC chips, like 74LS series, then you should not forget to test them before soldering, some chips may have defect. (TL866 Minipro Programmer is able to test some of logic IC)
As you can see I have uploaded many projects and I am still working on new projects. If you have any questions, please look for answers online. Unless I specify explicitly, all my projects are tested and confirmed to work under normal circumstances before being shared. I'm sorry I didn't have enough time to answer all the questions.
Use this PCB at your own risk !
Have fun
Thank you.
(DIY) SUPER SALT DIAGNOSTIC CARTRIDGE FOR ATARI 8-BIT FAMILY (SHORT VERSION)
*PCBWay community is a shared platform and we are not responsible for any design issues.
- Comments(2)
- Likes(9)
- Francisco Meza Feb 04,2024
- Engineer Sep 29,2023
- Darren Bassett Jun 23,2023
- D Roos Apr 23,2023
- Fred Harris Apr 17,2023
- Brian Keane Mar 30,2023
- Marcello Cruz Dec 02,2022
- Özay ÖzayTuray Nov 22,2022
- David Hansen Nov 22,2022
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by (DIY) C64iSTANBUL
- COMMODORE 128 DIAGNOSTIC REV.785260 KEYBOARD DONGLE COMMODORE 128 DIAGNOSTIC REV.785260 KEYBOARD DONGLE This is a Commodore C128, C128D, C128DCR 785260 ...
- COMMODORE 128 15KHz DISPLAY ADAPTER (C128 80 COLUMN ADAPTER) COMMODORE 128 15KHz DISPLAY ADAPTER.RGBI to RGB converter for VDC output.Hello, This is a tested an...
- PCB HOUSE WITH LED LIGHT (DECORATION) PCB HOUSE WITH LED LIGHT (DECORATION)Hello,PCB Thickness: 1mmCOMPONENT LISTCR2032 BatteryCR2032 Batt...
- CGTR COMMODORE AMIGA COASTER V2B CGTR COMMODORE AMIGA COASTER V2BHello,This is another version of CGTR Commodore Amiga CoasterDiamete...
- (DIY) COMMODORE VIC-20 GAME CARTRIDGE for 8x 8KB ROMs (DIY) COMMODORE VIC-20 GAME CARTRIDGE 8x 8KBYou can make your own custom Commodore VIC-20 Multi Game...
- AMIGA PS/2 MOUSE CONVERTER ADAPTER REV.3 (WITH JOYSTICK INPUT) Hello,This board has been tested on the Amiga 500 port-1 connected with a PS/2 mouse and standard jo...
- (DIY) AMIGA 500 - SWITCHLESS BOOT DRIVE SELECTOR Rev.3 (RETRO VERSION of 3 RESET BOOT DRIVE SELECTOR) (DIY) AMIGA 500 - SWITCHLESS BOOT DRIVE SELECTOR Rev.3(RETRO VERSION of 3 RESET BOOT DRIVE SELECTOR)...
- AMIGA 4 PLAYER JOYSTICK ADAPTER (DIY) AMIGA 4 PLAYER JOYSTICK ADAPTERHello,This is a tested and working project.This Amiga Four Play...
- BARE METAL COMMODORE 64 EMULATOR GEEKS' EDITION GPIO CONFIG2 BARE METAL COMMODORE 64 EMULATOR(GPIO CONFIG2) (GEEKS' EDITION)Many thanks to Randy Rossi for BMC64 ...
- COMMODORE 64 KEYBOARD FACEPLATE FOR TACTILE BUTTON KEYBOARD PROJECTS Hello,This PCB is a Commodore 64 tactile buttons keyboard faceplate for some of my projects.It is pr...
- SD2iEC with BROWSER CARTRIDGE (MICRO-SD) for COMMODORE 64 SD2iEC with BROWSER CARTRIDGE (MICRO-SD VERSION) for COMMODORE 64SD2iEC (Commodore 64 disk drive emu...
- SD2iEC (COMMODORE 64 DISK DRIVE EMULATOR) POWERED from USER PORT (MICRO-SD VERSION) Hello, This is a tested and working project. (Tested on Commodore 64 and Commodore VIC-20)This is a...
- XANTHOS ARCH Commmodore, Atari 9-pin DIY Game Controller Hello,This is a tested and working project.XANTHOS ARCH is a small, simple, DIY, 9 pin game controll...
- AMIGA SCART CABLE CONNECTION EASY PCB Hello,This is a tested and working project.This Amiga scart cable connection PCB is an Easy DIY proj...
- IMPOSSIBLE MISSION GAME CARTRIDGE for COMMODORE 64 IMPOSSIBLE MISSION GAME CARTRIDGE for COMMODORE 64 Hello, This is a tested and working circuit board...
- (DIY) ATARI 2600 MULTI GAME CARTRIDGE (DIY) ATARI 2600 MULTI GAME CARTRIDGE You can make your own custom Atari 2600 Multi Game Cartridge. ...
- SD2iEC with BROWSER CARTRIDGE for COMMODORE 64 SD2iEC with BROWSER CARTRIDGE for COMMODORE 64 SD2iEC (Commodore 64 disk drive emulator) with File B...
- SD2iEC & EPYX FAST LOAD CARTRIDGE V2 (TQFP) FOR COMMODORE 64 SD2iEC & EPYX FAST LOAD CARTRIDGE V2 (TQFP) This, SD2iEC & Epyx Fast Load Cartridge V2 PCB i...
-
RPI - 8 IO PLC With ATTiny85 Watch Dog
132 0 0 -
Nintendo Famicom HVC-001 Controller Shells
176 0 1 -
COMMODORE 128 DIAGNOSTIC REV.785260 KEYBOARD DONGLE
174 0 2 -
COMMODORE 128 15KHz DISPLAY ADAPTER (C128 80 COLUMN ADAPTER)
209 0 2 -
-
-
-
TEKTRONIX THS710,THS720,THS730 LED Backlight drop in replacement Controller
564 0 0