|
1 C1 100UF 25V CAP-8*5 |
x 1 | |
|
2 C2 0.1UF CERAMIC |
x 4 | |
|
3 C3 220NF CERAMIC |
x 1 | |
|
4 R1 3.3K AXIAL-0.4 |
x 1 | |
|
5 R2 1K AXIAL-0.4 |
x 1 | |
|
6 R3 8M2 AXIAL-0.4 |
x 1 | |
|
7 R4 1M AXIAL-0.4 |
x 3 | |
|
8 R5 100K AXIAL-0.4 |
x 3 | |
|
9 R6 10K AXIAL-0.4 |
x 4 | |
|
10 IC1 4013 DIP-14 |
x 1 | |
|
11 D1 1N4007 DO-41 |
x 2 | |
|
12 Q1 2N7000 TO92 CBE |
x 1 | |
|
13 LED 1 14 P-12 PCB RELAY |
x 1 | |
|
15 DB-37 RIGHT-ANGLED CONNECTOR |
x 1 | |
|
15 10AMP RELAY |
x 1 | |
|
16 ARDUINO NANO |
x 1 | |
|
17 BC547 |
x 1 | |
|
18 220R |
x 1 | |
|
19 I2C OLED 128X64 |
x 2 | |
|
20 HC-SR04-Ultrasonic SENSOR |
x 2 | |
|
21 MALE FEMALE HEADER PINS |
x 30 |
Stanley A Meyer Auto Start AUTOFILL Vic Matrix GMS Db 37 www.hot-rod-usa.com
Stanley A Meyer Auto Start AUTOFILL Vic Matrix GMS Db 37
www.hot-rod-usa.com Join Support help change the World https://www.patreon.com/securesupplies?fan_landing=true
updated 12 02 21
ID Name Designator Footprint Quantity
1 C1 100UF 25V
CAP ALUM 100UF 20% 25V RADIA
100μF 25V Aluminum Electrolytic Capacitors Radial, Can 2000 Hrs @ 85°C CAP-8*5 1 UVR1E101MED Nichicon Digikey 493-1061-ND
https://www.digikey.com/en/products/detail/nichicon/UVR1E101MED/588802
2 C2 0.1UF CAP CAP-CBB-10.0*4.5 0.1μF ±10% 50V Ceramic Capacitor X7R Radial 1 C322C104K5R5TA KEMET Digikey 399-4329-ND https://www.digikey.co.th/product-detail/en/kemet/C322C104K5R5TA/399-4329-ND/818105?utm_adgroup=Kemet&utm_source=google&utm_medium=cpc&utm_campaign=Smart%20Shopping_Supplier_Kemet&utm_term=&productid=818105&gclid=Cj0KCQiA0-6ABhDMARIsAFVdQv_bKJ-H2L1lcbHXmr9x57RmgKcQm1wtsqsa5mOVs_fcjBr6I3uAHCwaAp-KEALw_wcB
3 C3 220NF
CAP FILM 0.22UF 10% 400VDC RAD
0.22μF Film Capacitor 200V 400V Polyester, Metallized Radial CERAMIC 1
QXK2G224KTP
Nichicon Digikey 493-3536-ND https://www.digikey.com/en/products/detail/nichicon/QXK2G224KTP/2117915
4 R1 3.3K 3.3K R AXIAL-0.4 1 Digikey https://www.digikey.com/en/products/detail/stackpole-electronics-inc/CF14JT3K30/1741376 5 R2 1K 1K R-0.5W 1 kOhms ±1% 0.5W, 1/2W Through Hole Resistor Axial Flame Retardant Coating, Safety Metal Film 1K R-0.5W 1 kOhms ±1% 0.5W, 1/2W Through Hole Resistor Axial Flame 1 RNMF12FTD1K00 Stackpole Electronics Inc Digikey RNMF12FTD1K00-ND https://www.digikey.in/product-detail/en/stackpole-electronics-inc/RNMF12FTD1K00/RNMF12FTD1K00-ND/1683975
6 R3 8M2 AXIAL-0.4 1 Digikey https://www.digikey.in/product-detail/en/stackpole-electronics-inc/CFM14JA8M20/CFM14JA8M20-ND/1742286
7 R4 1M AXIAL-0.4 3 Digikey https://www.digikey.com/en/products/detail/yageo/CFR-25JB-52-1M/99
8 R5 100K AXIAL-0.4 3 Digikey https://www.digikey.com/en/products/detail/stackpole-electronics-inc/CF14JT100K/1741263
9 R6 10K 10K R-0.5W 10 kOhms ±5% 0.5W, 1/2W Through Hole Resistor Axial Metal Film 10K R-0.5W 10 kOhms ±5% 0.5W, 1/2W Through Hole Resistor Axial Metal Film 1 SFR16S0001002JA500
Vishay Beyschlag/Draloric/BC Components Digikey
10 IC1 4013
IC FF D-TYPE DUAL 1BIT 14DIP
Flip Flop 2 Element D-Type 1 Bit Positive Edge 14-DIP (0.300", 7.62mm) DIP-14 1 CD4013BE Texas Instruments Digikey 296-2033-5-ND https://www.digikey.com/en/products/detail/texas-instruments/CD4013BE/67245
11 D1 1N4007 DIODE GEN PURP 1KV 1A DO41 DO-41 2 1N4007-T Diodes Incorporated Digikey 1N4007DITR-ND https://www.digikey.com/en/products/detail/diodes-incorporated/1N4007-T/607
12 Q1 2N7000
MOSFET N-CH 60V 200MA TO92-3 TO92 CBE 1 2N7000FS-ND ON Semiconductor Digikey 2N7000FS-ND https://www.digikey.com/en/products/detail/on-semiconductor/2N7000/244278
13 Red LED RED CLEAR 5MM T/H Red LED Indication - Discrete 3V Radial LED1 1 5219247F Dialight Digikey 350-2677-ND https://www.digikey.co.th/product-detail/en/dialight/5219247F/350-2677-ND/2429365
14 P-12 PCB RELAY 12a 123vac 10a 250vac JQX-14FF3 5VDC-1C Relay 12v 1 not used not used not used not used not used not used not used not used not used
15 DB-37 RIGHT ANGLE CONNECTOR 1 182-037-113R531 NorComp Inc. DIGIKEY 182-37ME-ND https://www.digikey.de/product-detail/en/norcomp-inc/182-037-113R531/182-37ME-ND/858369
15 10AMP RELAY 1 Digikey https://www.digikey.com/en/products/detail/te-connectivity-potter-brumfield-relays/ORWH-SH-112D1F000/4924991
16 ARDUINO
ARDUINO NANO ATMEGA328 EVAL BRD 1 A000005 Arduino Digikey 1050-1001-ND https://www.digikey.com/catalog/en/partgroup/atmega328-arduino-nano-evaluation-board/18334
17 BC547 Bipolar (BJT) Transistor NPN 45V 100mA 300MHz 500mW Through Hole TO-92-3 1 BC547B ON Semiconductor Digikey BC547BFS-ND https://www.digikey.com/en/products/detail/on-semiconductor/BC547B/976366
18 220R
220 Ohms ±5% 0.25W, 1/4W Through Hole Resistor Axial Carbon Film 1 CFR-25JB-52-220R Yageo Digikey 220QBK-ND https://www.digikey.com/en/products/detail/yageo/CFR-25JB-52-220R/1295
19 I2C OLED 128X64 2 326 Adafruit Industries LLC Digikey 1528-1220-ND https://www.digikey.in/product-detail/en/adafruit-industries-llc/326/1528-1220-ND/5353680
20 HC-SR04-Ultrasonic SENSOR ULTRASONIC SENSOR SONAR DISTANCE 40kHz 2 3942 Adafruit Industries LLC Digikey 1528-2711-ND https://www.digikey.com/en/products/detail/adafruit-industries-llc/3942/9658069
21 MALE FEMALE HEADER PINS
Connector Header Through Hole 4 position 0.100" (2.54mm) 30 61300411121 Würth Elektronik Digikey 732-5317-ND https://www.digikey.com/en/products/detail/w%C3%BCrth-elektronik/61300411121/4846827
22 Remote RF Kit Parallax Inc Key Fob Remote Control Development Kit 433MHz 700-10016 1 700-10016 Parallax Inc https://th.rs-online.com/web/p/communication-wireless-development-tools/8430812/
23 A02YYUW Waterproof Ultrasonic Sensor (4.5m) Operating Voltage: 3.3~5V
standby Current: ≤5mA Average Current: ≤8mA Blind Zone Distance: 3cm
Ranging Distance for Flat Object: 3-450cm 2 AS00349 https://www.arduitronics.com/product/3550/a02yyuw-waterproof-ultrasonic-sensor-4-5m
15 DB-37 RIGHT-ANGLED CONNECTOR 1 Digikey
16 Pressure switch 4 bar 60 psi 2 wire 1 Digikey https://www.turck.de 17 Pressure switch 6 bar 90 psi 2 wire 1 Digikey https://www.turck.de/attachment/d101929.pdf
https://www.digikey.com/catalog/en/partgroup/atmega328-arduino-nano-evaluation-board/18334
=======================================
the code Bro Enjoy
Support SECURE SUPPLIES here
patreon.com/securesupplies?fan_landing=true
ARDUINO AUTOFILL CODE
Inbox
/* This code is written for Mr. Daniel Donatelli.
This project will automatically maintain perfect water level in WFC.
*/
#include <NewPing.h> //Including library for ultrasonic sensors
//Ultrasonic 1 setup
#define TRIGGER_PIN 10// Arduino pin tied to trigger pin on the ultrasonic sensor.
#define ECHO_PIN 11 // Arduino pin tied to echo pin on the ultrasonic sensor.
#define MAX_DISTANCE 200 // Maximum distance we want to ping for (in centimeters). Maximum sensor distance is rated at 400-500cm.
NewPing sonar(TRIGGER_PIN, ECHO_PIN, MAX_DISTANCE); // NewPing setup of pins and maximum distance.
//Ultrasonic 2 setup
#define TRIGGER_PIN2 8 // Arduino pin tied to trigger pin on the 2nd ultrasonic sensor.
#define ECHO_PIN2 9 // Arduino pin tied to echo pin on the 2nd ultrasonic sensor.
#define MAX_DISTANCE2 200 // Maximum distance we want to ping for (in centimeters). Maximum sensor distance is rated at 400-500cm.
NewPing sonar2(TRIGGER_PIN2, ECHO_PIN2, MAX_DISTANCE2); // NewPing setup of pins and maximum distance.
#include <Wire.h>
#include <Adafruit_GFX.h> //Including OLED library
#include <Adafruit_SSD1306.h> //Including OLED library
//Defination of basic display parameters
#define OLED_RESET 4
#define NUMFLAKES 10
#define XPOS 0
#define YPOS 1
#define DELTAY 2
#define LOGO16_GLCD_HEIGHT 64
#define LOGO16_GLCD_WIDTH 128
Adafruit_SSD1306 display(OLED_RESET);
Adafruit_SSD1306 display2(OLED_RESET);
//Tuning parameters for WFC (In Centimeters)
//Difference of 2cm is recommended between two levels for precise working of system
//UL stands for UPPER LIMIT
//LL stands for LOWER LIMIT
#define WFC_HIGH_UL 3
#define WFC_HIGH_LL 0
#define WFC_PERFECT_UL 10
#define WFC_PERFECT_LL 5
#define WFC_LOW_UL 20
#define WFC_LOW_LL 12
//Tuning parameters for Water Tank (In Centimeters)
//Difference of 2cm is recommended between two levels for precise working of system
//UL stands for UPPER LIMIT
//LL stands for LOWER LIMIT
#define WATER_TANK_100_UL 3
#define WATER_TANK_100_LL 0
#define WATER_TANK_75_UL 10
#define WATER_TANK_75_LL 5
#define WATER_TANK_50_UL 15
#define WATER_TANK_50_LL 12
#define WATER_TANK_25_UL 20
#define WATER_TANK_25_LL 17
#define WATER_TANK_0_UL 200
#define WATER_TANK_0_LL 22
#define PUMP_PIN 2
int TANK_INDICATION = 1;
void setup() {
Serial.begin(9600); // Set serial monitor with 9600 baud
display.begin(SSD1306_SWITCHCAPVCC, 0x3C); // initialize with the Display1 address
display2.begin(SSD1306_SWITCHCAPVCC, 0x3d); // initialize with the Display2 address
pinMode(PUMP_PIN, OUTPUT);
digitalWrite(PUMP_PIN, HIGH);
}
// setup end
void loop() {
if (sonar2.ping_cm() > WATER_TANK_100_LL && sonar2.ping_cm() < WATER_TANK_100_UL) {
display.clearDisplay(); //Display Reset
Print_Text("Water Tank Level", 15, 0, 1, false);
Print_Text("Water Level", 60, 9, 1, false);
Print_Text("100%", 83, 20, 1, false);
display.fillRect(5, 10, 50, 100, SSD1306_WHITE);
display.drawLine(5, 10, 5, 50, SSD1306_WHITE);
display.drawLine(55, 10, 55, 50, SSD1306_WHITE);
display.drawRect(5, 10, 50, 1, SSD1306_WHITE);
display.display(); //Executing display layout
TANK_INDICATION = 1;
}
else if (sonar2.ping_cm() > WATER_TANK_75_LL && sonar2.ping_cm() < WATER_TANK_75_UL) {
display.clearDisplay();
Print_Text("Water Tank Level", 15, 0, 1, false);
Print_Text("Water Level", 60, 9, 1, false);
Print_Text("75%", 83, 20, 1, false);
display.fillRect(5, 15, 50, 100, SSD1306_WHITE);
display.drawLine(5, 10, 5, 50, SSD1306_WHITE);
display.drawLine(55, 10, 55, 50, SSD1306_WHITE);
display.drawRect(5, 10, 50, 1, SSD1306_WHITE);
display.display();
TANK_INDICATION = 1;
}
else if (sonar2.ping_cm() > WATER_TANK_50_LL && sonar2.ping_cm() < WATER_TANK_50_UL) {
display.clearDisplay();
Print_Text("Water Tank Level", 15, 0, 1, false);
Print_Text("Water Level", 60, 9, 1
Stanley A Meyer Auto Start AUTOFILL Vic Matrix GMS Db 37 www.hot-rod-usa.com
*PCBWay community is a shared platform and we are not responsible for any design issues.
- Comments(1)
- Likes(2)
- Engineer Sep 15,2021
- Daniel Donatelli Oct 11,2020
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
-
10design
-
10usability
-
10creativity
-
10content
More by Daniel Donatelli
- Stanley A Meyer VIC Voltage intensifier circuit transformer board v1.8 updated jan 11 2021 Stanley A Meyer VIC Voltage intensifier transformer board Join Support help change the World https:/...
- STANLEY A MEYER LES BANKI AUTO START AUTO WATER FUEL REFILL STANLEY A MEYER LES BANKI AUTO START AUTO WATER FUEL REFILLJoin Support help change the World https:...
- Stanley A Meyer Gated Pulse Frequency Generator K3 with DB 37 updated 060622 Stanley A Meyer Gated Pulse Frequency Generator K3 with DB 37 to suit matrix vic main board Join Sup...
- Stanley A Meyer K2 Variable Pulse Frequency Generator GMS Vic Matrix PCB Gerber Stanley A Meyer K2 Variable Pulse Frequency Generator GMS Vic Matrix PCBGerberJoin Support help chan...
- Hyduino Stim Stimulator circuit board Ms EMS ECU Hyduino Stim Stimulator circuit board Ms EMS ECUJoin Support help change the World https://www.patre...
- Stanley A Meyer VIC Daughter Board Driver Transistor Circuit board Version 1 Stanley A Meyer VIC Daughter Board Driver Transistor Circuit board Version 1 Updated 28th Sept 2021T...
- Stanley A Meyer VIC Daughter Board Driver USed with Variac EEC eleectron eextrract & chokes Stanley A Meyer VIC Daughter Board Driver USed with Variac EEC eleectron extrract & chokes can d...
- DROP BEAR SPEEDUINO V1 Like a Exclusive Koala the Drop Bear Project progresses in the Cloud Spreading builder to Builder
- ENERGY HARVESTING Secure SuppliesPlease make and Ship these board to Secure supplies as a Donationwhatsapp+ 1520 84816...
- Stanley A Meyer EPG COIL Linear GAS Accelerator Part section pc Stanley A Meyer EPG COIL Linear GAS Accelerator Part section pc
- Stanley A Meyer EPG COIL Linear GAS Accelerator Part 1 Stanley A Meyer EPG COIL Linear GAS Accelerator Part 1
- auxiliary outputs Speedunio 4 position Auxiliary outputs Speedunio
- SPEEDUINO ADAPTER SERIES MOLEX 48P TO FLIPPED IDC BREAKOUT SPE MOLEX 48P TO FLIPPED IDC BREAKOUT SPEif you need more custom board made contact dan whatsapp + 1 620...
- Speeduino SIMULATOR(Ardu-stim) Speeduino SIMULATOR(Ardu-stim)
- 4 channel ignitor for hydrogen hot rod and hot rodding stanley a meyer 4 channel ignitor for hydrogen hot rod and hot rodding stanley a meyer
- Auto Cut Off Battery Charger (12v or 24v Automatic battery charger) Auto Cut Off Battery Charger (12v or 24v Automatic battery charger)
- speeduino v0.4.3 compatible PCB m52 speeduino v0.4.3 compatible PCB m52
- Speeduino ING 3-4 SMD Speeduino ING 3-4 SMD
-
Open Source Very Large Stick - Freejoy & MMjoy2 breakout board
411 0 0 -
RF Control training board for students based on ESP32 C3
561 0 2 -
Aquarius+ Computer, Standard PCB
769 0 4 -
KINETIC COASTERS with a TWIST! Laser or 3D Print some DIY Magic
535 0 1 -
RPI - 8 IO PLC With ATTiny85 Watch Dog
467 0 1 -
Nintendo Famicom HVC-001 Controller Shells
565 0 1 -
COMMODORE 128 DIAGNOSTIC REV.785260 KEYBOARD DONGLE
531 0 4 -
COMMODORE 128 15KHz DISPLAY ADAPTER (C128 80 COLUMN ADAPTER)
709 1 4 -