10answers

[PCB Assembly] Which USB or components need PCB edge?

Please see the picture below. In the PCB file, the customer wrote a PCB EDGE with a line next to it, but it does not match the shape.The customer replied that the line and characters can be deleted, b...
1answers

[Others] USB-C Male flex

Need to design a custom flex cable with USB-C male connector. The USB-C connector should be right angle so that it can easily go in the phone's usb-c port. See pic attached for reference.1. What t...
1answers

[Others] Should I use GPIO 40 pin header instead of USB?

I have a problem with bumping the usb cable that powers my RPI3B+ and it wiggles out and kills power. I was curious if I could cut off the USB end, solder those two wires to female GPOI connectors and...
4answers

[Others] Is there any way to fix it?

Hi all, my mini USB connector somehow broke off the board and has been rattling around its casing, I opened it up and found where its supposed to be connected, is this saveable? could I just solder th...
4answers

[PCB Assembly] How to replace this USB Type B connector?

The pins have came off from the connector and stuck to the board. Do I simply clean it off using braid, wipe it using alcohol + brush then use a flux pen. Thanks
Ranking Name Answers
1 PCBWay Team 8
2 Frederic 3
3 Engineer 1
4 Jegatheesan Soundrapandian 1