Product Description

10.3inch e-Paper e-Ink Display HAT For Raspberry Pi

10.3" E-PAPER HAT FOR RASPBERRY PI

Partial Refresh Support, Low Power, Wide Viewing Angle, Paper-Like Effect

Ideal for e-reader, eink monitor, industrial instruments...

Features At A Glance

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  • USB/SPI/I80 interface, for connecting with controller boards like Raspberry Pi/STM32, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/STM32)

Specifications

OPERATING VOLTAGE:5V

DISPLAY COLOR:black, white

INTERFACE:USB/SPI/I80

GREY SCALE:2-16 (1-4 bit)

OUTLINE DIMENSIONS:216.70 × 174.40mm

FULL REFRESH TIME:<1s

DISPLAY SIZE:209.66 × 157.25mm

REFRESH POWER:1.2W (typ.)

DOT PITCH:0.112 × 0.112mm

STANDBY CURRENT:0.1W (typ.)

RESOLUTION:1872 × 1404 pixels

VIEWING ANGLE:>170°

Advantages Of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.

E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Standard Raspberry Pi 40PIN GPIO Header

Compatible With Raspberry Pi Series Boards

Onboard USB/SPI/I80 Control Interface

For Use With Controller Boards Like Raspberry Pi/STM32

SPI PINOUT

VCC:Power, 5V input

GND:Ground

MISO:SPI MISO pin

MOSI:SPI MOSI pin

SCK:SPI SCK pin

CS:SPI chip selection, low active

RST:External reset, low active

HRDY:Busy status output, low active

  • Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
    View More

    You might like

    • 1.54inch NFC-Powered e-Paper, No Battery, Wireless Powering & Data Transfer
      $27.99 or 3360 Beans
      BUY NOW
    • 4.2inch NFC-Powered e-Paper Evaluation Kit, Wireless Powering & Data Transfer
      $89.99 or 10800 Beans
      BUY NOW
    • Universal e-Paper Raw Panel Driver Board(ESP8266 WiFi Wireless)
      $13.99 or 1680 Beans
      BUY NOW
    • Universal e-Paper Raw Panel Driver Shield(Arduino/NUCLEO)
      $31.99 or 3840 Beans
      BUY NOW
    • Universal e-Paper Raw Panel Driver HAT(SPI interface)
      $10.99 or 1320 Beans
      BUY NOW
    • Universal e-Paper Raw Panel Driver Board(ESP32 supports WiFi and Bluetooth)
      $14.99 or 1800 Beans
      BUY NOW
    • 10.3inch e-Paper e-Ink Display HAT For Raspberry Pi
      $199.99 or 24000 Beans
      BUY NOW
    • 7.8inch E-Paper E-Ink Display, HDMI Display Interface
      $256.99 or 30840 Beans
      BUY NOW
    • 2.66inch E-Paper E-Ink Display Module
      $16.99 or 2040 Beans
      BUY NOW
    • 2.9inch Touch E-Paper E-Ink Display HAT for Raspberry Pi
      $25.99 or 3120 Beans
      BUY NOW
    • 4.01inch ACeP 7-Color E-Paper E-Ink Raw Display
      $37.99 or 4560 Beans
      BUY NOW
    • 2.13" Touch E-PAPER With Case
      $24.99 or 3000 Beans
      BUY NOW
    • 7.5" E-PAPER HAT (B)
      $52.99 or 6360 Beans
      BUY NOW
    • Bit Dot Matrix Module
      $5.99 or 720 Beans
      BUY NOW
    • Full-color LED expansion board 16×10 RGB
      $17.99 or 2160 Beans
      BUY NOW
    • Full-color LED Expansion Board 4×8 RGB LED
      $14.99 or 1800 Beans
      BUY NOW
    • 2.9inch E-Ink Display Module 296x128 Pixel White,Black Two-Color
      $19.99 or 2400 Beans
      BUY NOW
    • -12%
      7.9-inch capacitive display IPS screen(Jetson Nano/raspberry pi)
      $70.00 or 9000 Beans
      BUY NOW
    • 3.71-Inch Ink Electronic Screen
      $18.99 or 2160 Beans
      BUY NOW
    • 4.2-Inch SPI Display
      $18.99 or 2279 Beans
      BUY NOW
    Product Name
    Link for reference
    Quantity