Lastest News: Impact in global logistics over COVID-19 Outbreak

PCB Prototype the Easy Way

Full feature custom PCB prototype service.

Why the non-plated holes /slots in the files are produced as plated holes /slots and cause short circuit problem?

It is because these holes are on the copper plane as below picture pointed by green arrow. Then the engineer mislead them as plated .


Pls design these holes in the area which don't have copper as below picture pointed by red arrow ,then we will take them as non-plated .

image.png

Related articles

Comments (0)
Note: This message is only for the daily communication between PCBWay and customers. The response is not very timely.
If you have any urgent questions, please contact your salesman!
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP