PCB Prototype the Easy Way

Full feature custom PCB prototype service.

New, noteworthy, and recommended
PCB Sponsorships project

"Student Sponsorships & Discounts on
Printed Circuit Boards for Future Engineers"

  • Developing a pcb with stm32f407 processor and we are very into electronics.
    -We are a group of 3 students taking part in competitions like minisumo every year. We are currently developing a pcb with stm32f407 processor and we are very into electronics.
    126 2 3
  • Formula UBC SAE Student Team C***ry
    Formula SAE is an intercollegiate design series organized by SAE international to get university students involved in real-world automotive engineering.
    170 3 3
  • Near East University of Robotics
    Near East University Robotics Laboratory is a research laboratory not only involved with robotics but also in solar races and 3d printed materials for medical use.
    193 4 4
  • Weld to create an arduino compatible device
    Our idea is to offer participants a solderable, extendible, hackable badge of approximately 10cm x 12cm size.
    204 1 1
  • PermanPermanent magnet synchronous motor or brushless DC motor
    My project is about Motor Driving basically. I’m studying with Electric Machines Department which is member of Electric Engineering Study. Me and my mentor associate professor came to an agreement about my main subject maybe Permanent Magnet Synchronous Motors or Brushless Direct Current Motors.
    154 0 0
  • Developed a variable input constant output switching power supply converter S***ds
    This project is my final year Honours thesis. I have developed a variable input constant output switching power converter (AC-DC synchronous rectification boost / buck converter) that will be fitted inside a regenerative shock absorber. Due to the small nature of the design (25mm x 25mm) the manufacturing costs are very expensive. I have designed the PCB to fit inside the device in a compact solution.
    176 0 1
  • FHTbot open source robot d***ss
    Please fill in basic details for your project here An open source robot called a FHTbot is being developed by Adeliade Hackerspace (http://hackerspace-adelaide.org.au/) and Flinders Univeristy. We are going to give away 120 WiFi controlled robots called FHTbots at the next Makerfaire (https://www.makerfaireadelaide.com/). Attendees will assemble the robots, program them and then control them with their phones. The participants will then be given a challenge where they can remote control their r
    153 3 1
  • The concept of the competition is the students to design and manufacture their own single seat race P***ad
    Aristurtle is a research student team of the Aristotle University of Thessaloniki,Greece, whose aim is to design and build the first electric single-seat racing car in North Greece and participate in the international Formula Student FSAE competitions.
    148 0 3
  • Create a start-up company and produce wearable equipment P***ad
    Our project goal is to make a startup and producing wearable devices that can be worn by people to measure their walking movements. We use this data to improve their walking and make an analysis of it. Thus, how more people we can measure, how better! We need at least 5 devices to start with our project and 50 would be our ultimate goal, so we can give these devices to everyone and take this data to analyze.
    89 0 0
  • the Lions Racing Team from the Technical University Brunswick Germany
    Students build a single seat formula racecar with which they can compete against teams from all over the world. The competition is not won solely by the team with the fastest car, but rather by the team with the best overall package of construction, performance, and financial and sales planning.
    81 0 0
  • They must collaboratively design and build a formula-style electric or plug-in hybrid racecar and co A***ha
    This season, the team will be competing in three competitions which are Formula Hybrid, Formula SAE Electric and Formula North.
    54 0 2
  • Create and promote a professional engineering team P***ad
    Formula SAE is an intercollegiate design series organized by SAE international to get university students involved in real-world automotive engineering. In total, Formula SAE has over 500 universities competing in 8 different competitions around the world. At these competitions, students present, justify, and race their open wheeled formula-styled racecars.
    64 1 0
  • Europe's most established educational motorsport competition P***ad
    "Formula Student (FS) is Europe's most established educational motorsport competition, run by the Institution of Mechanical Engineers. The competition aims to inspire and develop enterprising and innovative young engineers. Universities from across the globe are challenged to design and build a single-seat racing car in order to compete in static and dynamic events, which demonstrate their understanding and test the performance of the vehicle."
    50 0 0
  • Design, model and manufacture Formula One racing P***ad
    participating in the Formula Student, an international competition, with the objective of designing, modelling and?fabricating?a Formula One type racing car.
    71 2 0
  • A 10MHz gallium nitride based buck converter with high performance custom made gate driver circuit P***ad
    A 10MHz gallium nitride based buck converter with high performance custom made gate driver circuit and timing generator implemented in FPGA.
    54 0 0
  • Build a single-seat formula car
    Electronic systems embedded in the car provide important contribution from the vehicle control and data acquisition system. Development of an entire wiring setup for the engine and sensor hub for in depth DAQ forms the major scope of the electronics department.
    65 0 1
  • Design and build a miniature mouse robot 2***32
    I am an active member of Robotics Club "Robomatic" at my university. I have designed and built a micro mouse robot on atmega128 microcontroller. Although designing that kind of robot on a one-layer home made pcb is very limiting as the size of the robot is a crucial factor for competition. C.Project Details
    60 0 1
  • development board for a wifi chip
    It is a prototype for an electronic board designed by me, that will be used as a development board for a wifi chip and should demonstrate the use of the embedded GPIO. With a PSU circuit also.
    48 0 0
  • Promote robotics and artificial intelligence research
    Embedded System RoboIME electronics consist of nine boards: (a) the Main board, responsible for communication between the other boards; (b) the Stamp board, responsible for the embedded computations; (c) the Kicker board, responsible for maintaining high voltage and activate the kickers; (d) five motor controller boards which are responsible for the robot’s motion control and the dribbling device. (e)Transceiver board, which is responsible for the link between the robot and the main computer.
    59 0 1
  • CSDC builds satellites U***it
    UBC Orbit is the University of British Columbia’s satellite design team. We build satellites for the CSDC and more recently have begun to build satellites for the BC Government. THe CSDC is the canadian satellite design challenge and is a multi university challenge that has them compete to see who has built the best satellite and the winner gets a launch for their satellite to go into space. UBC Orbit has been competing in this competition with an image recognition payload.
    189 2 16
  • making and designing att new wireless speaker. s***ll
    We are two guys doing our degree project in industrial design. The project is about making and designing att new wireless speaker. We are also designing the electronics and need prototype for final presentation. Any sponsoring would be great and 30% on further prototypes would be highly appreciated!
    86 0 3
  • consists in building a robot capable of running through a course marked with a line in the floor in p***ro
    Robochallenge (http://www.robochallenge.ro/) is a robotics competition that is held every year, hosted by the Faculty of Electronics, Telecommunication and Information Technology at “Politehnica” University of Bucharest.
    58 0 1
  • a device you simply set in your car and it will alert your phone c***42
    When the temperature of the vehicle becomes unsafe, the device will notify the owner via message of choice. Ex.(Text, Call, Voicemail)
    52 0 0
  • construct extremely fuel efficient ecocars H***ng
    The scope of the project is to construct extremely fuel efficient ecocars, and to compete in the annual Shell Eco-Marathon and drive as far on a single liter of fuel as possible.
    63 0 2
  • UQ Robotics is the main robotics group based at the University of Queensland t***en
    UQ Robotics is the main robotics group based at the University of Queensland. We are a student society and are self funded through fundraisers and events. We undertake projects throughout the year. We have over 100 members and hope to expand further this year. Projects we are undertaking in the coming year so far include a robotic air hockey table, a robot micro controller development board and workshops
    1,283 3 7
  • a test bench for energy sources management in electric vehicles
    Hi, we are a group of French students currently in internship at Université de Sherbrooke (Canada).
    91 1 0
  • My current project is an audio processing board M***ck
    My current project is an audio processing board. The whole system will be used as a speaker?cabinet?simulation for the electric guitar. By using impulse responses, the reaction and tone of a speaker can be simulated. It is a very versatile board because any other audio effects algorithm can be programmed, too. The user can access an input and an output jack. Additionally, a microSD?card can be inserted.
    76 0 0
  • Flight Controller for Micro Quadcopter S***ns
    Flight Controller for Micro Quadcopter
    80 2 0
  • an independent robot for the French cup of Robotics B***an
    We take part of the French Cup of robotics in May 2016 and will be present in May 2017. The French cup of Robotics is a challenge of robotics towards teams of young people enthusiast of robotics.This meeting allows many dialogues of knowledge and know-how between students. We have to do independent robot, which must respect the rules. This robot has to do many actions like retrieves ping-pong balls
    113 2 0
  • A Semester project where we’re making a two-wheel Balancing robot
    Layout a PCB including power and battery regulation, H-Bridge for motors, LCD Display, BT communications and a Z84 microprocessor to control everything. Once PCB designed program the control on the Z84.
    73 0 0
  • The project consists of a monitoring of soil variables using sensors F***no
    The project consists of a monitoring of soil variables using sensors. This values are sent to a webservice where I can process and managing all information about that I sent differente alert or warning
    142 0 12
  • our full time learners to create the sensor driven buggy
    We are going to work with our full time learners to create the sensor driven buggy and like many of our class projects intend to make it to a competition with local sponsors to inspire the young for the future
    63 1 1
  • Project is for power supply monitoring system to monitor health parameters
    Project is for power supply monitoring system to monitor health parameters such as voltage, current and frequency,temperature etc.
    57 0 0
  • designs, builds, and races an electric formula-style car to compete in the annual Formula SAE compet f***st
    The team currently has over 50 members with a strong background in power electronics and electric vehicles – we were the first team to drive across Canada in an electric car in 2010 and last year we converted a 1963 Volkswagen Beetle into an electric drag racing car with a 120V, 2400A lithium-ion battery.
    108 0 0
  • An international student based competition to design, manufacture and test an open wheel formula sty R***th
    The competition is Formula SAE (Society of Automotive Engineers). An international student based competition to design, manufacture and test an open wheel formula style race car. This photo is our 2015 team, UTS Motorsports Electric, with our first ever electric car “Juliet”
    1,235 33 7
  • making and designing att new wireless speaker s***ll
    We are two guys doing our degree project in industrial design. The project is about making and designing att new wireless speaker. We are also designing the electronics and need prototype for final presentation. Any sponsoring would be great and 30% on further prototypes would be highly appreciated!
    120 2 0
  • the robots like a OpenCV module for the lines and obstacles recognition f***99
    Our robotic project aim to compete at RoboCup, on a international plan. Particularly, our project is made for the Rescue line competition. The board that we need you to print is a slave board for the Jetson TK1.
    146 5 2
  • designs and builds a formula-type racecar each year to take to this competition h***nm
    I am responsible for the system which relays information to the driver. My design consists of an electronic dashboard and an indicator module which will be located in the steering wheel of our car.
    106 1 1
  • Flexible AC Transmission Systems (FACTS) - Unified Power Flow Controller (UPFC) a***ah
    My project is based on one of the latest technology in the field of power engineering and that technology is termed as “Flexible AC Transmission Systems” (FACTS).
    173 1 7
  • collaboratively design and build a formula-style electric or plug-in hybrid racecar a***mh
    “The Formula Hybrid Competition is an interdisciplinary design and engineering challenge for undergraduate and graduate university students. They must collaboratively design and build a formula-style electric or plug-in hybrid racecar and compete in a series of events. This educational competition emphasizes drivetrain innovation and fuel efficiency in a high-performance application.”
    909 0 7
  • Made a new hydrogen car (gain zero emission and clean world) 0***74
    Our project goals are gain zero emission and clean world. In this year have made a new hydrogen car. We designed it including 2 passengers, 4 wheels + urban consept, hydrogen+ battery powered car.
    96 1 0
  • Design and build a Cubesat - a small fully-operational satellite m***ke
    The Canadian Satellite Design Challenge (CSDC) began its inaugural offering in January, 2011. It is a competition for teams of university students (both undergraduate and graduate) to design and build a "Cubesat" - a small, fully-operational satellite - which will conduct a science mission.
    125 0 0
  • A power control module (PCM) handles power distribution to the entire car s***39
    The competition I am preparing for is the SAE Collegiate Design Series. I'm a part of UMSAE, the University of Manitoba chapter of SAE International, a team which designs and builds a formula-type racecar each year to take to this competition.
    106 0 3